1184 - Without seeing a side-view of the item, it looks like a downward-looking view of a rotor for a medium-to-high speed centrifuge. The silver-colored center portion would screw into the centrifuge's spindle and hold the rotor in place, with the dark colored portion being the fixed-angle rotor itself. The outer silver area would be the "floor" of the centrifuge.
12/27/2007 6:03 AM
Anonymous said...
1184 - It also looks like the turntable for a 45 record player.
12/27/2007 6:36 AM
Anonymous said...
1181: base and axel for a globe, missing the globe iteslf. 1184: master for a record?
>1184 - With that clue I have decided that this is a discus!
This answer is correct.
12/28/2007 9:14 AM
Anonymous said...
1180 - An early telecommunications punch down tool?
1/06/2008 6:39 AM
1179. 37" long as seen in this first photo, the notch in the arm holds a level: [Image]
The lower piece of wood is hinged with the upper one and can be pivoted and held in position with the latch, making the total length 74". It's numbered 1 through 18, with each number representing 4". [Image]
A little hard to see, but there are 1" increments between the numbers: [Image]
1180. 5-1/2" long, an unidentified tool submitted by a visitor; descriptions of the photos below: - in the normally closed position. - as achieved by pulling back on the lower knurled piece. - an exploded view. [Image] Larger image
[Image]
This view shows the internal beveled groove in the sliding piece that mates with the tip: [Image]
1181. 24" tall: [Image]
1182. 3" long, submitted by someone who was looking to identify this device: [Image] Patented in 1934
1183a. 3-1/8" long, yet another one submitted by a visitor, who is looking to find out more about this level. The knob at the left adjusts the plunger up and down (photo 1183b on the left), to the right of the knob in the small slot is the level. [Image]
1183b. The tab on the right measures 5/8" and can be extended to 2". [Image]
1184. 8-1/2" diameter: [Image]
To submit photos, click on the profile link at the upper right to find my email address.
"Set 212"
9 Comments -
1184 - Without seeing a side-view of the item, it looks like a downward-looking view of a rotor for a medium-to-high speed centrifuge. The silver-colored center portion would screw into the centrifuge's spindle and hold the rotor in place, with the dark colored portion being the fixed-angle rotor itself. The outer silver area would be the "floor" of the centrifuge.
12/27/2007 6:03 AM
1184 - It also looks like the turntable for a 45 record player.
12/27/2007 6:36 AM
1181: base and axel for a globe, missing the globe iteslf.
1184: master for a record?
12/27/2007 7:47 AM
1179 is used for measuring the height of horses, 4" being one "hand"
12/27/2007 10:30 AM
Correct answers so far:
1179. Horse measure
1181. World globe stand
A clue for number 1184: it's not flat.
12/27/2007 12:04 PM
1183 for checking the depth of strike for piano keys?
12/27/2007 3:13 PM
1184 - With that clue I have decided that this is a discus!
12/27/2007 11:08 PM
>1184 - With that clue I have decided that this is a discus!
This answer is correct.
12/28/2007 9:14 AM
1180 - An early telecommunications punch down tool?
1/06/2008 6:39 AM