357. pa-ter is correct - self releasing ice tray divider. Aluminum. 359. Leg iron (cuff) with screw lock mechanism 361. Back of phone switchboard.
5/26/2005 6:20 AM
Anonymous said...
357: I agree with pa-ter,or it could be a tool for shoeing horses. 358: Definitely an ice cube tray 359: Bit for a draft horse 360: Scope or sighting device 361: Telephone switch board, my father has the thing that goes into the hole to connect the two parties. His mother was a switch board operator in the early part of the 20th century!
5/26/2005 11:27 AM
Anonymous said...
362. possibly a tool to set the pitch when sharpening saw blades
>Deflection is in fact an angle used in saw blades
Best guesses that I've heard so far are that it's used for adjusting the vanes in furnace air vents or that it's used with saw blades, I haven't been able to verify either one.
358. A close-up of something that used to be common [Image]
359. The foreground part is 3" long [Image]
360. This one is a pin mounted in a film canister, with a pin hole in the bottom of the container. Once again, the puzzle here is to determine the purpose of this small project. [Image]
361. A partial shot of something that I saw at the antique show last week. [Image]
Untitled
12 Comments -
357. wheel weight pliers. Used to install/remove clip on weights for balancing tires
358. divider for an ice cube tray
5/26/2005 5:48 AM
357. pa-ter is correct - self releasing ice tray divider. Aluminum.
359. Leg iron (cuff) with screw lock mechanism
361. Back of phone switchboard.
5/26/2005 6:20 AM
357: I agree with pa-ter,or it could be a tool for shoeing horses.
358: Definitely an ice cube tray
359: Bit for a draft horse
360: Scope or sighting device
361: Telephone switch board, my father has the thing that goes into the hole to connect the two parties. His mother was a switch board operator in the early part of the 20th century!
5/26/2005 11:27 AM
362. possibly a tool to set the pitch when sharpening saw blades
5/27/2005 5:50 AM
I have no clue. But very entertaining and fun. Nice job, can't wait to find out the answers. Intriguing idea for a blog, original.
5/27/2005 1:36 PM
>357. wheel weight pliers...
>358. divider for an ice cube tray
>359. Leg iron (cuff)...
>361. Back of phone switchboard.
All correct, though the 359 was marked handcuffs
>357: I agree with pa-ter...
>358: Definitely an ice cube tray
Both correct
>359: Bit for a draft horse
>360: Scope or sighting device
Both incorrect
>361: Telephone switch board...
Correct
>362. possibly a tool to set the pitch when sharpening saw blades
I'm still trying to find out what this is for, it's inscribed "deflecting key"
Rob
5/27/2005 4:26 PM
Deflection is in fact an angle used in saw blades
5/28/2005 8:59 PM
>Deflection is in fact an angle used in saw blades
Best guesses that I've heard so far are that it's used for adjusting the vanes in furnace air vents or that it's used with saw blades, I haven't been able to verify either one.
5/29/2005 11:03 AM
Your blog is extremely interesting....great job!
5/31/2005 4:45 PM
362. deflector key - used to adjust barr type grills and registers.
6/08/2005 4:11 PM
>362. deflector key - used to adjust barr type grills and registers
This is probably correct
Rob
6/08/2005 7:11 PM
362. I don't know but I have one too.
5/11/2007 8:23 PM