302 seems like an upholstery tool fabrication tool to press material into a channel.
302 It might be a handle to lift or travel down a wire, but I don't see any wear in the channel.
304 a staple for securing mitered frames, or wood strips.
305 what is done in private is none of my business ¦;¬)
306 a gold finger ring
307 some kind of a drafting compass?
3/23/2005 8:53 PM
Anonymous said...
304 - Correction to my earlier post: Brand name is spelled SKOTCH
3/23/2005 11:18 PM
Anonymous said...
303 Optical Survey Target. Yeah its a SWAG but Dietzgen used to make lots of optical and engineering equipment. I suspect that this was a target for leveling work. Adjust the height of the staff until the red and blue split the level reference line in the transit / theodolite.
307 Trammel point for making a compass out of a yard stick. Lee Valley, Wade Garret and probably the local hardware store will have these.
>304 - A SCOTCH fastener. Intended for wood repair.
Yes, looks like there are different names for this one, my package said "wood joiner".
>302 seems like an upholstery tool fabrication tool to press material into a channel.
>302 It might be a handle to lift or travel down a wire, but I don't see any wear in the channel.
These two aren't correct.
>304 a staple for securing mitered frames, or wood strips.
Yes
>306 a gold finger ring
It is a ring, but there is something about it that makes it different and more interesting than most other rings.
>307 some kind of a drafting compass?
Correct.
>303 Optical Survey Target.
Yes, instructions for its use can be seen on this site:
http://www.yorksurvey.co.uk/tipstrik/tips22.htm
307 Trammel point for...
Correct
3/24/2005 6:34 PM
Anonymous said...
304 - one of my old hardware catalogs shows a cut with SKOTCH printed on the item but the catalog text spells it Scotch.
3/25/2005 8:20 PM
Anonymous said...
No. 308, used in pairs clamps two "slats" of wood together at a specified length ... we call the result a "Story Stick" and use it for a variety of things. Usually the choice for comparing the lengths of diagonals to insure frame is square during glue up.
4/04/2005 3:19 PM
Anonymous said...
No. 310 appears to be a cone cutter for the end of dowel rods - similar to a pocket pencil sharpener but considerably larger.
4/04/2005 3:21 PM
Anonymous said...
N0. 311 seems to be a gromet punch for the older larger gromets that had "fingers" to fold over
4/04/2005 3:22 PM
Anonymous said...
No. 313 looks like the "tool box" hacksaw needed to get in tight places
4/04/2005 3:23 PM
Anonymous said...
304 SKOTCH Wood Joiner! My company, Superior Fastener, has manufactured these since their inception back in 1928. We still sell thousands of them. The word skotch was to denote thrifty as you could repair many things with this item. 3m wanted to call it's products skotch but that conflicted with our trademark so they had to settle for Scotch. Ever heard of Scotch Tape? Now you now the rest of the story!
6/06/2006 12:48 PM
302. 7" long [Image]
[Image]
[Image]
303. Someone looking to ID this object sent in these photos, here is his description of it:
The outer part of the thicker cylinder is a sleeve that slides to reveal and obscure the two prisms, and there is a slot about 1cm long opposite the prisms' window, as seen in the third photo.
If you look through it from the prism window side (as in the first image) you see, from top to bottom: whatever's to the right; whatever is straight ahead (through the slot); whatever's to the left.
The longer, narrower piece looks like it's designed to accept the end of a staff.
Untitled
12 Comments -
307 - An adjustable trammel point.
3/23/2005 8:03 PM
304 - A SCOTCH fastener. Intended for wood repair.
3/23/2005 8:12 PM
302 seems like an upholstery tool fabrication tool to press material into a channel.
302 It might be a handle to lift or travel down a wire, but I don't see any wear in the channel.
304 a staple for securing mitered frames, or wood strips.
305 what is done in private is none of my business ¦;¬)
306 a gold finger ring
307 some kind of a drafting compass?
3/23/2005 8:53 PM
304 - Correction to my earlier post: Brand name is spelled SKOTCH
3/23/2005 11:18 PM
303 Optical Survey Target. Yeah its a SWAG but Dietzgen used to make lots of optical and engineering equipment. I suspect that this was a target for leveling work. Adjust the height of the staff until the red and blue split the level reference line in the transit / theodolite.
307 Trammel point for making a compass out of a yard stick. Lee Valley, Wade Garret and probably the local hardware store will have these.
3/23/2005 11:19 PM
>307 - An adjustable trammel point.
Correct
>304 - A SCOTCH fastener. Intended for wood repair.
Yes, looks like there are different names for this one, my package said "wood joiner".
>302 seems like an upholstery tool fabrication tool to press material into a channel.
>302 It might be a handle to lift or travel down a wire, but I don't see any wear in the channel.
These two aren't correct.
>304 a staple for securing mitered frames, or wood strips.
Yes
>306 a gold finger ring
It is a ring, but there is something about it that makes it different and more interesting than most other rings.
>307 some kind of a drafting compass?
Correct.
>303 Optical Survey Target.
Yes, instructions for its use can be seen on this site:
http://www.yorksurvey.co.uk/tipstrik/tips22.htm
307 Trammel point for...
Correct
3/24/2005 6:34 PM
304 - one of my old hardware catalogs shows a cut with SKOTCH printed on the item but the catalog text spells it Scotch.
3/25/2005 8:20 PM
No. 308, used in pairs clamps two "slats" of wood together at a specified length ... we call the result a "Story Stick" and use it for a variety of things. Usually the choice for comparing the lengths of diagonals to insure frame is square during glue up.
4/04/2005 3:19 PM
No. 310 appears to be a cone cutter for the end of dowel rods - similar to a pocket pencil sharpener but considerably larger.
4/04/2005 3:21 PM
N0. 311 seems to be a gromet punch for the older larger gromets that had "fingers" to fold over
4/04/2005 3:22 PM
No. 313 looks like the "tool box" hacksaw needed to get in tight places
4/04/2005 3:23 PM
304 SKOTCH Wood Joiner! My company, Superior Fastener, has manufactured these since their inception back in 1928. We still sell thousands of them. The word skotch was to denote thrifty as you could repair many things with this item. 3m wanted to call it's products skotch but that conflicted with our trademark so they had to settle for Scotch. Ever heard of Scotch Tape? Now you now the rest of the story!
6/06/2006 12:48 PM