209. Sculpting tool for clay?210. A wood rasp211. A die for a press break?[mp]
12/03/2004 1:46 PM
208. Staples
12/03/2004 3:43 PM
210 meat tenderizer?
12/03/2004 9:33 PM
207 Threaded insert for wood. This type is driven in. sometimes found in furniture but you can buy then hat hardware stores.Russ
12/04/2004 1:28 AM
208 A closeup of a shopvac hose. Russ
12/04/2004 1:30 AM
>209. Sculpting tool for clay?This answer is very close, but not technically correct.>210. A wood raspYes>211. A die for a press break?This one isn't a die.>208. StaplesCorrect>207 Threaded insert for wood...Yes, it's an insert nut, hammer-in type.
12/04/2004 7:06 AM
215: valve cap
12/10/2004 6:05 AM
>215: valve capCorrect, it's a valve cap with a tool on top
12/11/2004 6:02 AM
227. Cycle spoke tightener.Slides onto the small hex shaped nut that protrudes through the wheel-rim.
12/17/2005 6:21 PM
posted by Rob H. at 8:00 AM on Dec 3, 2004
Untitled
9 Comments -
209. Sculpting tool for clay?
210. A wood rasp
211. A die for a press break?
[mp]
12/03/2004 1:46 PM
208. Staples
12/03/2004 3:43 PM
210 meat tenderizer?
12/03/2004 9:33 PM
207 Threaded insert for wood. This type is driven in. sometimes found in furniture but you can buy then hat hardware stores.Russ
12/04/2004 1:28 AM
208 A closeup of a shopvac hose. Russ
12/04/2004 1:30 AM
>209. Sculpting tool for clay?
This answer is very close, but not technically correct.
>210. A wood rasp
Yes
>211. A die for a press break?
This one isn't a die.
>208. Staples
Correct
>207 Threaded insert for wood...
Yes, it's an insert nut, hammer-in type.
12/04/2004 7:06 AM
215: valve cap
12/10/2004 6:05 AM
>215: valve cap
Correct, it's a valve cap with a tool on top
12/11/2004 6:02 AM
227. Cycle spoke tightener.
Slides onto the small hex shaped nut that protrudes through the wheel-rim.
12/17/2005 6:21 PM