Post a Comment On: Fawcett Avenue Conscripts

[Image] Selection of 10mm Franco-Prussian war figures - mostly from Pendraken, but a few from Magister Millitum. My seventh submission to Curt's Analogue Hobbies Painting Challenge touched on a familiar theme - more Franco-Prussian war stuff, but this time in a different scale - these are some 10mm-sized figures.

When I dive into a period, I tend to overdo it.  Different scales of games give both different gaming options on the table (bigger battles vs. smaller skirmishes) and different painting & collecting challenges, a chance to experience a different "look".  One big draw for this period is the marvellous uniforms, I just love painting them, and only 28mm-sized castings, in my opinion, truly do these great uniforms justice.

At the same time, 28mm-sized figures bring a number of gaming limitations, namely a very limited ability to represent the main battles on the table.  The key encounters in the Franco-Prussian war were very large, multi-corps-per-side affairs.  I could settle in and paint only 28mm figures from this period and nothing else for years and still not crank out enough castings to represent all of the units for a major battle. And even if I did that anyway, well, no regular table would give a chance to hold all of that stuff for a game in 28mm - it would have to be huge.

So while I am excited to do 28mm "Black Powder" games (which would represent small parts of much larger battles), the only chance I will ever have to try to give the fellows a truly large battle will go to the smaller scales - 10mm or 6mm. I'm still primarily interested in 28mm, but I puttered around trying out both 10mm and 6mm in between painting rounds, but found that in this case 10mm was the winner, in particular the sculpts from Pendraken.

Last spring I painted up a few units of basic 10mm infantry to try and get a feel for painting in the scale, and just to see if I would enjoy it. I did! Now, with Curt's Painting Challenge under way again, and since I have all of the paints I use for Franco-Prussian War figures handy, I have been working on more 10mm stuff.  I have been painting it sort of "on the side of the table", doing a few here-and-there while something else dries etc.  After a few weeks of this now, I thought it would do for a submission, particularly as I don't have anything else to show for this week...

I am intending to try the "1871" rules by Bruce Weigle.  While some of the rules mechanics seem a bit bolshy to me (simultaneous movement? uh...ok...) the books themselves are a must-have for anyone interested in the period, as the research and planning he has put into the scenarios and force lists alone make these so, so worth your time.

In the basic "1871" rules, one base represents a battalion of infantry, two squadrons or cavalry, or one artillery battery.  Command figures are mounted one, two or three to a base depending on seniority. For bases I just used the handy "Flames of War" sized ones I have from Warbases, as they were on hand, and I have a lot of them already!

[Image] Prussian artillery, three batteries - sculpts from Magister Millitum [Image] Prussian artillery, three more batteries - sculpts from Pendraken. So in this submission there are six batteries of guns, a decent down-payment on the artillery complement of a Prussian Corp (a Prussian Corp typically had four batteries per division, as well as an artillery reserve with six or so batteries of the heavy stuff).  Among the guns are three from Magister Millitum - also fine 10mm sculpts, although on this range I have to give the edge to Pendraken.

[Image] Prussian Dragoons in 10mm - figures from Pendraken. [Image] Two bases together represent a regiment The cavalry are Prussian Dragoons, the two stands together representing a regiment.

[Image] Tremendous sculpts from Pendraken. Outstanding quality. The officer is also a Magister Millitum casting (came with the guns).

[Image] Mounted Prussian officer from Magister Millitum - a fine sculpt, but I do prefer Pendraken's work in this area. There is a unit of Prussian Jagers - this would represent the single Jager battalion attached to each Prussian Corp.

[Image] Prussian Jagers in 10mm
[Image] A splash of green among the green. And I haven't ignored the French completely, honest! Here is a unit of French Chasseurs.  One battalion of Chasseurs was attached to each French division.

[Image] French Chasseurs in 10mm. [Image] The single base will represent a battalion in the "1871" rules. Of course, rules like "Black Powder" are very flexible, so there are many different rules sets under which these 10mm chaps could be pushed around the table. And "1871" can also be scaled up and down (so that one base of infantry would be regiment, or conversely, two bases could represent a battalion etc).  But, for now, I at least plan to try "1871" at some point. Even at smaller scales, large numbers of castings are needed - there were some big scraps in the Franco-Prussian war, so will call for lots of castings.

Thus, while 28mm will remain my main focus for this period, doing a few 10mm figures here-and-there throughout my painting sessions has been fun and I plan to continue that throughout the Challenge this year. With luck, it will bring a few more units like this to the table.

And will I try painting this period in 15mm too, just to see what it looks like? Yeah...probably...I'm bad for that...

This gave me another 74 points toward my goal of 1200 "points" of painting in Curt's Painting Challenge.  I'm almost half-way to my goal!