Post a Comment On: Fawcett Avenue Conscripts

My third submission for this year's painting challenge is a selection of early to mid war units appropriate for a German Panzer Division. They include a squad of Kradschützen (motorcycle troops), a Sd.Kfz. 222 light armoured reconnaissance vehicle, and a platoon of Panzerkampfwagen I Ausf B light tanks. The last vehicle is an iconic Panzerkampfwage VI Ausf H or Tiger I.
The Kradschützen are a mix of Black Tree Design and Bolt Action miniatures for a total of nine figures on five motorcycles, with two where the passenger is riding in a sidecar, and two where the passenger is riding pillion. I picked up the two Black Tree Design motorcycles a number of years ago at an estate sale, and the assembly looked rather daunting with the bike, the handle bars, and the riders all being separate pieces. I wanted to flesh them out a bit, and ordered two motorcycles from Warlord Games where the passenger was riding in a side car. One more motorcycle was ordered a few years later, again from Warlord Games, but this time with the passenger riding pillion. If I thought Black Tree Design bikes were daunting, the ones from Warlord Games consisted of 10 separate pieces, and didn't come with assembly instructions. I was able to find those online, but to get everything to fit correctly was really tricky, especially since the handle bar and the driver's arms came as a single piece.
With much patience, I was successful in getting everything together so that it all looked right, although the drivers still don't seem to be sitting properly on the seat. The instruction for the bikes with side cars showed stowage satchels attached to the sidecar, but none came with the kits. I did get enough for a single bike in the kit with the passenger riding pillion. These got moved over to the sidecars, one to each, and the second stowage bin coming from my bits box along with a gas mask canister. Three of the bikes were mounted on long bases that came from Warlord Games, while the bikes with sidecars were mounted on bases cut from old plastic gift cards. Everything was primed in black and then painted with Vallejo or AK Interactive acrylics. They are now ready to take the field as part of the 8th Panzer Division. [Image]
[Image][Image]
The  Sd.Kfz. 222 light armoured car was another acquisition from the above mentioned estate sale. It was a multi-part metal casting which I think is an old Battle Honors kit. The scale looks closer to 1/48 than 1/56, and although the body is hollow, it still weighs in at 266g (almost 9.5oz). In fact, it is so heavy that the axles that came with the model were unable to support the weight without bending. I had to pull the wheels off again and replace the axles with lengths of florist wire that were much stiffer.The fit of the pieces was pretty wonky, and I had to fill a number of gaps with epoxy putty. The rear fenders were a single piece that were difficult enough to fit to the chassis, but the front fenders were even worse. They came as two separate pieces, and the fit to the chassis just didn't work as all the angles were slightly off. Eventually I gave up and fashioned the front fenders out of a single piece of thin plastic card. Once all the fenders were in place, I made some headlights out of the heads of pushpins that I have filed flat on one side. Finally I added the shovel and the rolled tarp from my  bits box. The commander that came with the model was wearing an Einheitsmütze, which is more mid to late war, so I replaced him with a figure from a Bandai tank kit. The vehicle was painted in a similar fashion to the Kradschützen, and then some AK Splattereffects Dry Mud was applied. It will make a useful addition to my early war Germans. [Image]
[Image]
[Image]
Next I have a platoon of three 1/56 resin Panzerkampfwagen I Ausf B light tanks from Warlord Games that I purchased as part of a bulk order along with DallasE. I liked how he mounted his on bases to make them a bit more compatible with 1/48 and 1/50 scale vehicles, so I did likewise. Assembly was pretty straight forward with the tracks, etc, fitting well to the chassis. I used magnets to attach the turrets, countersinking them into the chassis and the turret itself. The only flaw was that two of the exhaust pipes were not well cast, so I carved the partly formed bits away, and rebuilt the exhaust with some copper wire and the insulating sleeve. These were then painted using the same technique as for the armoured car. They were then mounted on the bases that had already been prepared with most of the sand, paint, and flocking before gluing the vehicles in place. The red vehicle numbers and German crosses on the tanks are appropriate for the France 1940 campaign. [Image]
[Image]
[Image]
Lastly I have  a Panzerkampfwagen VI Ausführung H, also called the Tiger I, of the 502nd Heavy Panzer Battalion. The battalion was the first unit to receive and field the Tiger I in August 1942, and it was one of the most successful German heavy tank battalions, claiming the destruction of 1,400 tanks and 2,000 guns.The model is a 1/48 scale Bandai kit that I picked up on eBay. It was obviously a second hand kit as it had already been started, but what the original owner had done was glue both the inner and outer road wheels on all the odd numbered axles before realizing their mistake. I contacted the seller about the problem, who refunded my money without wanting me to send the kit back. It languished for many years in my pile of unfinished projects until I thought that a repair was possible. I used a fine saw blade to cut off all the outer wheels from the odd numbered axles. Now all the inner wheels could glued onto the even numbered axles. I drilled holes into the axles and the back of the wheels I had removed with a pin vice to take a short piece of florist wire to provide strength to the joint when I glued them back in place with a little bit of epoxy putty to fill the slight gap. Once all that was done, the rest of the kit was assembled as per the instructions.Prior to this, I had already acquired a Solido 1/50 diecast Tiger I in grey. It is visible in the background of the pics below, but not part of the submission. Other than a bit of tweaking, new decals, and adding a muzzle break, the Solido model is as I bought it. Since it was already painted in Panzer grey, I wanted to use the same paint scheme with the Bandai model to make them part of the same unit. After priming it with black, I used AK Interactive acrylic 704 Dunkelgrau, and then drybrushed the raised areas and corners with a lighter grey. Special parts like the tools and tow cables were painted appropriate colours, and a few parts got either a black or a dark brown wash. Once the tracks were on, I hit the lower areas with AK Splattereffects Dry Mud.  [Image]
[Image]
[Image]

Thanks for reading.