Applications Google
Menu principal

Post a Comment On: WarpKnitting4u.com

"Advantages and Disadvantages of Warp Knitting Tricot and Raschel machines"

6 Comments -

1 – 6 of 6
Anonymous Anonymous said...

Would you explain of Compound sinker bar (2-point knockover).

4 May 2010 at 05:57

Blogger Warp Knitting said...

Already describe at http://www.warpknitting4u.com/2009/08/stitch-forming-process-on-tricot.html,

2 points knock over (on tricot machines)
1st knock over 0 degree.
2nd knock over 60 degrees holding down.
Please read also stitch forming process on raschel machine.

3 points knock over (on raschel machines) http://www.warpknitting4u.com/2009/10/warp-knitting-stitch-forming-process-on.html

1st knock over 285 degrees.
2nd knock over 345 degrees.
3rd knock over 0 degrees,with additional part which no available on tricot machine i.e knock over bar (trick plate bar).

by the way, would you like to introduce your self please,thank you.

4 May 2010 at 20:52

Anonymous Anonymous said...

My name is Soewarso, I've been working in knitting Factory (1984-2001)in Bandung Indonesia, in spare part provisioning and maintenance department.I want to obtain a deep understanding of The process on tricot and raschel warp knitting also warping. Nowadays I supply some spare part for some knitting factory. Thank you for your kindly.

7 May 2010 at 22:25

Blogger Warp Knitting said...

Dear Mr.Soewarso,thank you for introduced your self and visiting our site.

14 May 2010 at 10:44

Anonymous Soewarso said...

Dear sir,In tricot machine starting-up without fabric take-up possible. but in raschel machine starting-up only with fabric take-up possible. is it the causes of feeding device of that two kind machine are different? Would you explain about it. Thank you

8 September 2010 at 16:13

Blogger Warp Knitting said...

the capability on tricot machines start-up without take up not cause of the yarn feeding system but cause of the knock-over system (2 points knock over)allowed the loop release from the needle without need to pull by take up roller.(can run with high courses per cm).

15 September 2010 at 07:08

You can use some HTML tags, such as <b>, <i>, <a>

This blog does not allow anonymous comments.

Comment moderation has been enabled. All comments must be approved by the blog author.

You will be asked to sign in after submitting your comment.
Please prove you're not a robot