These are some of the components for the 18' long table I need to make for Zama.
I'm using 9mm MDF for the boards, with a 10mm thick laker of styrene to be stuck on top using No More Nails. Later, hexes will be inscribed into the styrene. I have another 30 or so sheets of the styrene down in the cellar. I'm designing it so that it can be used for either an 18'x4' table, or an 8'x8'.
[Image]
The MDF was surprisingly heavy to carry 200 yards to my car, and when I measured it later at home, I discovered that the chap in the shop has cut it to the wrong size (604mm wide instead of 600mm; it doesn't fit the styrene), so I'm going to need to carry it back! Grrr. At least he didn't under cut it, I suppose.
2 Comments
Close this window Jump to comment formno more nails is not great imho.
I would have used styrene glue or pva here.
I tried the NMN once on such a project and never tried again.
24 November 2009 at 11:18
Eek! What was the problem?
24 November 2009 at 13:08