Hi Brian. (sorry for the off topic) I am nikos from greece. Congratulations for your blog. I am a civ. eng using cad since 1992. (autocad was 3 floppy disks) After all those years and also working with adt for 5 years i deside to jump on revit and i found out just what you say. Do it on revit as you are going to do it on the real word. All others are just toys. I have an issue with fill patterns (using revit 10) so i would be glad if you can give me any idea. I can't bring-in any .pat file to create a new pat. i always take a syntax error in line x. (i have try all possible combo with units draffting model inch mm etc.) I think that actually there is no syntax error because i am getting it also at the help's example pat or if i try to bring as new an excisting pat that already works in revit. Also if i delete line x (the error line) i get the syntax error in next lines. Do you have any idea what is going wrong? Thank's for your time Be always creative. Regards Nikos bkm_engk@otenet.gr
I appreciate for your work. Thank you very much for your information, nice job keep it up.. import Australia
February 16, 2012 at 4:22 PM
We had to draw up a kiosk stall which happened to be elliptical in shape. I was very surprised to see when using the wall tool there is no option of elliptical or spline wall. I know drawing an elliptical or spline based wall is going to be rare, but it came up in one of our projects it is obviously needed.
[Image]
However there are to workarounds. Create an in-place wall using an extrusion.Create an elliptical mass and apply a wall by face.
Anyway - being able to create an elliptical wall using the Wall Tool is now on my wish list.
"Creating an elliptical room"
2 Comments -
Hi Brian. (sorry for the off topic) I am nikos from greece.
Congratulations for your blog.
I am a civ. eng using cad since 1992. (autocad was 3 floppy disks)
After all those years and also working with adt for 5 years i deside to jump on revit and i found out just what you say. Do it on revit as you are going to do it on the real word. All others are just toys.
I have an issue with fill patterns (using revit 10) so i would be glad if you can give me any idea.
I can't bring-in any .pat file to create a new pat. i always take a syntax error in line x. (i have try all possible combo with units draffting model inch mm etc.) I think that actually there is no syntax error because i am getting it also at the help's example pat or if i try to bring as new an excisting pat that already works in revit. Also if i delete line x (the error line) i get the syntax error in next lines. Do you have any idea what is going wrong?
Thank's for your time
Be always creative.
Regards Nikos
bkm_engk@otenet.gr
March 10, 2010 at 9:37 PM
I appreciate for your work. Thank you very much for your information, nice job keep it up..
import Australia
February 16, 2012 at 4:22 PM