clutch brake

天黑了，雨还在下......

2009-04-09T02:35:00.000-07:00

华灯初上，天，又黑了......
本该安静的晚上，已被连绵不绝的雨搞的如同跳踢踏舞一般，拖沓、聒噪......
被夹杂在焦躁的气氛中间，仅仅一个“烦”字，已经表达不了此刻的感受，很多天都是这样，感冒好的莫名其妙，人这种东西，也许本就该贱养，适应了也就这样了，在家一贯养尊处优的身体，在我的贱养下，适应能力逐年递升，感冒频率还是如此，但好的速度明显与日递增，就像曾经他说过：“恢复能力跟狗一样了......”呵呵，大概也就依稀能记得这句话了，这是关于我们唯一的记忆，太久了，太久了......die casting wind generators wind turbine wind turbine wind turbine Manufacturer China Manufacturer

爱的结局

2009-03-19T19:51:00.000-07:00

爱是温柔的吗？
它太粗暴、太专横、太野蛮了；
它像荆棘一样刺人。
真诚的爱情永远不是一条平坦的大道。
吻是恋爱生活上的一首诗。
爱的黑夜有中午的阳光。
如果说「喜欢」不需要理由的话，
那么「憎恨」也就不需要什么依据。
最甜的蜜糖可以使味觉麻木；
不太热烈的爱情才会维持久远；
太快和太慢，结果都不会圆满。
悲哀是爱情的证据。
但是，
深深的悲哀是判断力不足的证据。Mechanical Seals plate bending machine China Manufacturer automotive bearings

悟

2009-03-12T23:02:00.000-07:00

今天星期六，阴，休息．
平时８点半上班，我７点５０分起床，今天休息，我５点起床，在电脑前呆了半天终于悟出道理了．．．．．
原来我睡眠时间一直比别人足！！！改善下吧，谢谢～wind turbine、wind generators
注：不是坏事，勿需商量

在你心中有这样的一个人吗？

2009-03-12T23:00:00.000-07:00

在你心中有这样的一个人吗？
.
你们可能相爱过，你们也可能喜欢着彼此，
但是，为了什么原因你们没能在一起？
也许他为了朋友之间的义气，不能追你。
也许为了顾及家人的意见，你们没有在一起。
.
也许为了出国深造，他没有要你等他。
也许你们相遇太早，还不懂得珍惜对方。
也许你们相遇太晚，你们身边已经有了另一个人。
也许你回头太迟，对方已不再等待。
也许你们彼此在捉摸对方的心，而迟迟无法跨出界线。
.
不过即使你们没在一起，你们还是保持了朋友的关系。但是你们心底清楚，对这个人，你比朋友还多了一份关心。即使不能跟他名正言顺的牵着手逛街，你们还是可以做无所不谈的朋友。他有喜欢的人，你口头上会帮他追，心里却不是很清楚你是不是真的希望他追到。
.
他遇到困难时，你会尽你所能的帮他，不会计较谁又欠了谁。合肥租房网男女朋友吃醋了，你会安抚他们说你和他只是朋友，但你心中会有那么一丝的不确定。每个人这辈子，心中都有过这幺一个特别的朋友，很矛盾的行为。一开始你不甘心只做朋友的，但久了，突然发现这样最好。你宁愿这样关心他，总好过你们在一起而有天会分手。
你宁愿做他的朋友，彼此不会吃醋，才可以真的无所不谈。
特别是这样，你还是知道，他永远会关心你的。做不成男女朋友，当他那个特别的朋友，宁波人才网和合肥人才网有什么不好呢？你心中的这个特别的朋友...? 是谁呢？

向1000冲刺

2009-02-13T00:43:00.000-08:00

每次游泳，约人是最麻烦的，不是你约了人吃饭，就是我出差，总之凑不到一块。所以今夏在特区报办的游泳卡到现在才游了10次。眼看10月11日就要到期了，决定一个人独自游了。
一个人游，没有同伴聊天，只好一个劲儿的游。在浅水区晃悠了1个小时，却不见累，于是鼓足勇气向深水区进攻。
说到深水区，一直都有阴影：大三时，我们经常去工大游泳馆，那时初生牛犊不怕虎，才刚学会蛙泳就跳进深水区勇猛地向泳道那端冲去，眼看快到岸了，忽然发现岸很高，抓不到安全把手，心想这下完了，小命要没了。慌乱挣扎中，一只大手抓住了我，原来是一旁的救生员——他早就发觉我不对劲了。虽然这位可敬的叔叔严肃地批评了一番，但心里真是对他感激不尽。从此以后，每次跟朋友游泳，他们邀我到深水区游，我都婉拒，除非技术比较好的跟在我后面，我才敢放心的游一道。记得有一次，我在浅水区晃，突然一个熟悉的声音叫住了我，原来是系副主任。他以老师的那种命令口吻让我去深水区游，百般无奈，只好让他跟在我后面，我在前面游，那种滋味就像晚上睡觉没有被子那样，极无安全感。
深深地吸了口气，调整呼吸，便向对岸游去。也许是比较镇定吧，这次居然一次游完了这50米，而且一点都不慌张，于是在回游时刻意往泳池中央靠近，遇到对面过来的人，也能调整方向，而不会向以前一看到人便失去重心。风力发电机 wind turbine wind generators manufacturer 铁路新闻
欣说她每次游1000米，今天，我也给自己定了1000米的目标。但最终只游了800米。不过没关系，坚持，下次一定能游到1000！

10月4日随笔

2009-01-22T20:05:00.000-08:00

到底怎么了难道真的这么下去？？？？？
我也不知道，真的这么难吗？
还是算了，让时间冲淡一切吧！有些事情努力了，给了机会了。结果不一定是能让自己满意的。一切随缘吧安徽合肥汽车租赁合肥房产网喷码机雅芳风力发电机。

兴情故事

2009-01-17T21:24:00.000-08:00

天灰蒙蒙的，雨总是无情的下着，心情也随着天气变的很糟糕，哎，今天真的有点倒霉，因为公司事情比较多，所以早点上班，结果竟然手机被偷，前些天刚丢了100元。有点伤心，在经济危机的这个关键时刻，还总是频频发生这种事情！失财呀！雪上加霜，快要成乞丐了！不过也还好了钱包没被偷！庆幸了！铁路新闻 China Manufacturer China Manufacturer

苦苦的感觉

2009-01-17T21:23:00.000-08:00

个人的一生可以爱很多次,但只有一个人会让你笑的最开心,痛的最刻骨!
　　
　　把爱留给爱你的人吧，至少他会对你认真。
　　
　　有些缘分是注定要失去的,有些缘分是永远不会有好结果的,爱一个人不一定要拥有,但拥有一个人就一定要好好去爱他.
　　
　　人生就是找寻爱的过程,每个人的人生都要找到四个人:自己,你最爱的人,最爱你的人,共度一生的人,但很悲观的是,你最爱的,往往没有选择你;最爱你的,往往不是你最爱的;而最长久的,偏偏不是你最爱也不是最爱你的,只是在最适合的时间出现的那个人.
　　
　　独自看到世间的美景而无人分享,应该是一种遗憾吧!!!
　　
　　真正的爱情是人生旅途中手拉手的搀扶,是两根琴弦在同一旋律中的和谐的颤动,它不是怎么占有,而应是双方互信互守的专一````一生守候,不是一句简单苍白的山盟海誓,而是无数个平淡日子的同舟共济,相濡以沫。
　　
　　性格决定命运,心态决定方式,快乐与否不在于你拥有多少,而在于你以怎样的心态去看待生活
　　
　　爱情有时就像一道菜,一个口味时间长了难免会令味觉麻木,这时更重要的不是草率地换一道爱情麻辣烫,
　　而是冷静下来,在平淡的表面找寻爱情的醇厚滋味,必要时再放些佐料,或许爱情仍旧美味无比.

　　
　　相爱的人不知道什么是麻木，除非不再相爱了。
　　
　　有些人是一直会刻在生命里的,哪怕忘记了他的声音,忘记了他的笑容,忘记了他的脸,可是每次想起他,那种感觉,却永远不会变.
　　
　　有些美丽的意外，总是在你最伤心的时候出现;有些温暖的意外，总是在你最寒冷的时候来到身边;你走过万水千山，结果却又回到苍白的起点;你以为你被众人抛弃，结果却又看见自己站在灯火辉煌的中间。
　　
　　人的一生常常会遇到一些意想不到的事,改变你的生活,wind generators wind turbine 合肥汽车租赁改变你的****,甚至,改变你的性格.
　　
　　生活最无奈的一点就是你永远猜不透它行驶的方向，好像很平稳，随时都会给你来个急刹车，让你猝不及防，遍体麟伤。
　　
　　那些曾经以为永远不会忘记的伤痛,那些以为永远都无法消失的伤口,都会在时间的手掌里,慢慢地得到抚平. 合肥租车
　　
　　这个世界上有很多没有来由的仇恨,很多没有来由的嫉妒,没有来由的怀疑,没有来由的愤怒,这些,都在人性美好的一面下暗自滋长着,等待着有一天美好的表层被捅出一个口子,然后,这些黑暗而肮脏的东西就会喷涌而出,一瞬间占领整个世界. 风力发电机
　　
　　这个世界上永远存在着一些无奈,而这些无奈,你永远无法改变！！
　　
　　缘份是注定的，幸福是自己的，希望我身边的朋友们都能努力争取自己的幸福！！！

随想

2009-01-05T04:23:00.001-08:00

似真似假的深秋，有时候明明感觉已经是真的秋天了，可是最近几天的天气却太出乎意料，早上起来，一点凉意都没有，有的只是明显感觉皮肤在出汗，尤其是中午，真的跟夏天一般热。
可是却也奇怪，到了晚上，天气还是明显亮了下来，一下子差好几度，有点措不及防。
一段时间的忙碌过后，趁着今天相对空些，几乎算是准时下班，出了办公楼，依旧是昏按的天色，天天如此，也许这才是秋天的标志，白天很短，过了五点天就暗，更何况是六点半呢。
慢慢踱到公交站牌，凉风袭来，忽地就想念起曾经的时光，在大学校园里，也最喜欢这样的季节，似乎带点小小的伤感，在其实最无忧无虑的时光中感受的有些莫名其妙的伤感，说不出具体的内容却真实的小小的伤感着，也许这就是校园时光的特色吧。，喷码机雅芳总之于现在是无论如何也感受不了当时的小情绪。
还记得曾经一到周末，就跟着三五姐妹，成群结对去逛街，看到好吃的，人手一个，当街就享用美食，那个时候的快乐真的是不经意就产生，真实的快乐。最喜欢和KF去走走泉城路，那里的建筑物是灰色系的，浅浅的灰色配深秋的暖暖的阳光，走在瑟瑟的风中，把自己的小手放在对方温暖的大手里，肆无忌惮的享受这种小甜蜜，还是比较怀念。
到现在，跟着KF，经历小小大大的风雨，也四年了，突然就很享受这种难得的平静的生活，喜欢周末就窝在家里，做几个简单的菜，一起打扫卫生，感觉就很温馨，碰到天气好，就出去逛逛街，感受下外面新鲜的空气，恩，真的很不错。
有时候也会在心里默默感谢KF的关心风力发电机 wind turbine wind generators manufacturer
虽然表面上从来都不动声色，不会甜甜的话语，偶尔还有点大男子主义，可是还是会包容我的小脾气，忍受我的小唠叨，有时候还会故意刷坏让我生气，然后再艰难的想办法哄回来，理由是某某人生气了很好玩，所以被某某人不客气的称之为变态。也许，我就是从心底里喜欢这种简单的生活。
谨以此纪念一下今天突然迸发的小思绪。

瑞星卡卡助手误杀邮件是不是故意的

2008-11-17T06:41:00.000-08:00

7日，一些使用瑞星卡卡助手和Outlook　Express的用户发现，邮件莫名其妙丢失。瑞星表示，瑞星公司已在互联网上公开致歉，并已对卡卡助手进行了紧急升级，请广大用户升级卡卡助手（版本号6.0.0.64）之后重启电脑，并保证不会再发生故障，但不能保证用户所丢失的数据能够完全恢复。

我是瑞星卡卡助手的用户，但庆幸的是我使用micsoft oulook而不是Outlook　Express收发邮件，所以这次我逃过一劫。虽然逃过此劫，但是我还是心有余悸。假如下 die casting aluminum die casting 次卡卡助手对outlook产生兴趣，那我将在劫难逃。

尽管瑞星公司已经道歉并采取了补救措施，但是wind generators 我还是对这次误杀有些搞不懂，我甚至一度产生这是不是故意的疑问，因为这些杀毒软件公司爆出的误杀事件实在是太多了。

作为一款上网安全和系统清理软件，我不知道为什么对用户的邮件系统这么青睐，对于个人用户来说，邮件的内容也许算不上什么，可对于企业用户来讲，邮件很可能涉及企业的商业机密和商业信息。一个可以让客户邮件莫名丢失的BUG究竟同木马或者病毒有什么本质上的区别？瑞星卡卡上网助手的推广广告中说：依托于瑞星强大的反病毒技术，开机时自动扫描电脑中的可疑文件，直接送达瑞星病毒分析服务器进行处理，并向用户反馈结果，第一时间清除最新木马和恶意程序。这是不是意味着瑞星完全可以侵入客户的邮件系统，盗走我们的邮件。

有数据说瑞星有8000万用户，此次遭受损失的用户起码在千万以上。可根据瑞星官方的说法，卡卡助手升级后不能保证用户所丢失的数据能够完全恢复。这是不是意味着瑞星在为自己的过失寻找托辞。如果所有的误杀都靠道歉就能解决，我相信类似的误杀会不断地出现。所以oil paintings 我希望能看到瑞星能及时制定一个时候补偿方案。道歉难道能替代赔偿吗？

3721上网助手已经被永远地钉在了“流氓软件”的耻辱柱上，卡卡这次又爆出了误杀的消息。我不知道谁会是下一个。超级兔子、360安全助手，这些上网的守护者会不会也不小心弄出一个BUG，让我们的邮件丢失，或者文件丢失？但愿瑞星这次只是一个意外！

China's wind turbine manufacturers to receive tax rebate

2008-09-05T19:25:00.001-07:00

The Chinese government has begun refunding value-added tax (VAT) and import duties on core wind power turbine parts and materials in a move to promote the development of clean energy, the Ministry of Finance announced on Wednesday.

The rebate will be backdated to Jan. 1, according to a statement posted on the ministry's website.

Meanwhile, the country is to cancel its tariff-free policy on imports of wind turbines with a capacity less than 2.5 megawatts.

The government has set a target for renewable energy to account for 10 percent of the country's energy consumption by 2010 and 15 percent by 2020.

From:Wind Generator Manufacturer

古典装饰有什么样的魅力

2008-08-09T17:13:00.000-07:00

风格与品位风格，为家居装饰中的灵魂，中国古典家居，在漫长的岁月中形成了强烈的“东方风格”，一般分为明清两大类，明代家居以简练、纯朴为基本特征；而清代家居却讲究精雕细刻，在画梁雕栋中融入民间故事、神话传说，表现了一种雍荣华贵的祥和之气。从品位上可分为平民百姓、官家、宫廷等层次。而具体到现代人的家居装修装饰，则可根据个人的喜好与经济条件来选择，其中更应注重文化品位。房间较宽敞的家庭可选清代风格，面积较紧张的家庭可考虑明代风格。苏州明雅古典艺术装饰，就能为您的家增添这份古典的魅力。

　　怀旧与情调从心理上讲，越是远离一个年代，人们越觉得那个年代富有神秘性、怀念与吸收那个年代的文化营养，身居“古宅”吟上几首古诗，便会找到一些怀旧的感觉。

　　天然与淳朴中国古代家居装饰，在用材上讲究天然的优良木质；在装饰工艺上内容多取自大自然的万物，如花鸟鱼虫、飞禽走兽、山水树木、天上人间，将丰富的想象与美好的寓意贯穿其中，如清代家具上常常出现的蝙蝠、梅花鹿、怪兽与喜鹊，取其谐音，即为“福、禄、寿、喜”。而在对人物的刻画上又常常是人人面带笑容，反映出中华民族百折不挠、乐观向上的一种精神风貌。

　　大气与充溢古代家具多以高大宽敞的房间为装饰基础，因此有些家具的装饰性反倒比实用性更大一些，如放在中堂里的“条几”、“屏风”、卧室中的“架子床”等等。如今，现代家居的发展，厅与卧室的空间都在不断地扩大，因此，像“条几”这样的家具，又有了它的一席之地，3－4米长的条几放在大空间里，显得十分流畅与气派，是陈列工艺品的极好用具，再加上它本身的精雕细刻，便进一步营造了艺术氛围。

　　休闲与文化中国古典家居装饰，其明显的特征就是有一种休闲的味道，中国水墨画、软笔书法写就的对联、条幅等尤能表现出一种清高超脱的文雅之气。

　　实用与保值古典家居因其材质的优良、文化艺术的丰富含量具有保值性。古典与现代古典家居装饰中，并不排斥现代科技生活用品，如在一个古老的台案上，放置一台最先进的大屏幕彩电，就有了一种时空的跨越与对比，给人以强有力的心灵震撼。如将现代工艺、材料精制的各种彩色玻璃镶嵌其中，可给人一种奇特的视觉感受。

　　吸收与发展现代家居中的古典装饰，并非简单的模仿，而是在继承的基础上努力去挖掘与发展，如现代人讲究家具中的舒适性，以人的活动为出发点，因此对古代家具中的一些不合理的造型应多加以改造，如将平面的硬坐面改为曲线型的软坐面等等。中国古典家居的高大空间魅力十足，由此便对现今和未来的住宅建设提出了新的要求：单元房内应该有起伏变化的“层高”，在“天外有天”中才是理想的生活空间，其装饰与家具才有更为丰富的表现力。

　　苏州明雅古典艺术装饰有限公司的家具都由苏州市博雅古艺家具厂生产，博雅古艺家具厂是一家专营明清家具和红木家具的生产商和销售商。经营范围包括明清古家具销售，仿古家具制作与展示。同是创办了《苏州博雅明清家俱研究所》专业研究开发古典家俱与现代装修的融和，即目前国内外相当流行的热点——中式装修，致力于剖析中国传统家具文化内涵，着力于产品的内在神韵表现，注重整体文化品位追求。所生产的家俱即保持了古典家具的特色，又赋予了它新的生命力

安徽霍邱龍翔美食王是综合生产经营朗德鹅与鹅肥肝的民营企业,朗德鹅的副产品种有鹅肥肝、鹅头、鹅掌、鹅翅、鹅胗、鹅心、鹅脖、带皮朗德鹅、带皮鹅腿等郎德鹅系列产品

合肥中豪装饰工程公司是一家实力雄厚的合肥装饰公司,公司主要业务有:合肥家庭装修、合肥装修、合肥装饰设计,公司经理有十多年的装饰设计及施工管理经验，并能在施工现场全程监理

安徽蜂鸟电机是专业从事小型风力发电机,风力发电的研发、生产、销售与服务，并提供小型风力发电机场解决方案，是超小型风力发电机专业供应.51rank 网站制作团队能帮助您，他们是宁波网站建设、宁波网站优化专家,合肥网站建设，合肥网站制作，合肥SeO，宁波网站建设，宁波网络公司，宁波网站制作,合肥生活网

Stainless steel casting

2008-08-09T17:12:00.001-07:00

Ningbo Pacific Casting Machinery Factory products f actory is specialized and engaged in aluminum pressure die casting, zinc die casting, and electric aluminum castings and vehicle spare parts, the production of zinc die casting has been supplied to many factories in China . Meanwhile, our products also cater to the to international buyers with strong competitiveness. Relying on our excellent international practice ,the deep understanding of east and west culture , as well as broad, stable, long-term trade with domestic and foreign customers and efficient quality management system, we are willing to generate mutual benefit, and hand in hand seek communal development with domestic and foreign partners. Die Casting,Pressure Die Casting,Aluminum Die Casting,Alloy Die Casting,Zinc Die Casting,Die Casting Machine Parts,Investment Casting,Aluminum Investment Casting,Carbon Steel Casting,Alloy Steel Casting,Stainless steel casting,Sand Casting,Green Sand Casting,Resin Sand Casting,Iron Sand Casting,Aluminum Casting,Aluminum Casting Alloys,Aluminum Casting Die Process,Aluminum high pressure die casting,Aluminum Pressure Die Casting,Aluminum Gravity Casting,Aluminum Sand Casting,Aluminum Precision Casting,Iron Casting,Ductile Iron Casting,Grey Iron Casting

Ningbo Pacific Casting Machinery Factory mainly deals with aluminuim castings of the following products, covering: metal parts processing, automobile spare parts aluminium castings, aluminium metal mining machinery, , electrical products ,instrumentation aluminium castings, electrical tools, pneumatic tools , and other agricultural machinery.

At our factory, quality control is an active, function of manufacturing. Quality assurance starts the minute raw materials come in the door and continues through every stage of the casting process. We achieve part-to-part consistency, so the last casting is the same high quality as the first. We work to ISO 9001:2000,a standard of excellence that is recognized around the world.To supply qualified castings with reasonable price is our permanent principle. Dear customers, if you have any interesting to our factory, pls feel free to contact with us by email or fax. We can accept the files with the form of Pdf, Jpg, CAD, IGS, STP,Pro-E as well as SOLIDWORKS via email. As soon as we receive your inquiry, we will pay much attention to it, and our experienced engineers will make a quick cost estimate to your inquiry, then will quote our competitive price to you at the earliest time.

we assure the best quality to our customers

Wind turbine principle

2008-07-01T02:52:00.000-07:00

The principle of wind power is the use of wind drivenwindmill blade rotation, and then through the growth machine will improve the speed of rotation, to encourage power generators. The wind energy into electricity using wind energy is the most fundamental way. There are wind turbine wind round, generators (including installation), transferred to the (tail), the tower, speed and security agencies, and other components of energy storage devices

Ultra-low-speed wind turbine for a rotating disk by a fixed set, the wind round leaves, fixed wheel, legislation to strength, collecting ring set, the rudder-under Weiduo and composition of the inverter system. Rotating disk and a fixed set of the system of generators, inverters, including 50 Hz sine wave oscillator, plastic circuits, low-voltage circuit and the output of the inverted push-pull circuit. The system of the advantages of generators, first built with ultra-low-speed characteristics of pressure, in the leaves of speed to less than 100 per minute when the normal power generation, weak wind region for the development and utilization of wind resources to provide a new way to the second is the structure Simple, non-core slot and no armature winding, easy maintenance, long life

Thewind energy into electricity using wind energy is the most fundamental way. There are wind turbine wind round, generators (including installation), transferred to the (tail), the tower, speed and security agencies, and other components of energy storage devices. Wind turbine works is relatively simple, the wind round in the wind under rotation, it lookout kinetic energy into mechanical energy of the wind axle. Wind generators in the axle driven rotary power generation.

Wind round is set wind devices, it is the role of the flow of air with the wind energy into mechanical energy of the rotating wheel. General wind turbine wind round by two or three blades pose. In wind turbine, a generator has been used in three types, namely, DC generators, alternators synchronous and asynchronous exchange generator.

Wind generator to the tune of the functions is to make wind turbine wind round at any time to Ying Zhaofeng, so that they could maximize access to wind energy. Almost all of the general wind turbine is used to control tail wind round of the wind direction. Tail of the thin material is usually available in galvanized steel.

Speed limit of security agencies is to ensure that the safe operation of the wind turbine. Speed limit of the security agencies can set up round of the wind turbine wind speed of the wind speed in a certain area to maintain basically unchanged.

Wind turbine tower is the support of institutions, slightly larger than the wind turbine tower used by the general composition of the round steel or angle steel truss structure. Wind-power output of wind speed and the size. Because of the nature of the wind speed is extremely unstable, the output power of the wind turbine is also extremely unstable. A wind power generator is generally can not be directly used in the electrical, must be saved. Currently wind turbines for more than batteries used in lead-acid batteries

From:http://www.allwindenergy.com/hummer/post/wind-turbine-principle.htm

鹅肥肝网

2008-07-01T02:49:00.000-07:00

朗德鹅的鹅肥肝是法国美食的代表，被誉为世界三大美食之一。在欧美，鹅肥肝是十分名贵的高档食品，常用来宴请亲朋好友，招待贵宾。目前，我国出现了一批具有一定规模的集鹅养殖、加工于一体的企业。　　

产鹅肥肝的鹅在国外以填鸭式的方法饲养，而用特殊的“高密度饲料”自然饲养法生产的鹅肥肝，比人工填饲要科学、合理得多。这种专用育养鹅肥肝的饲料，主要是在青饲料中增加营养素的密度，再用鹅诱食剂，如麦苗提取物、食盐、虾精、带青菜香味的玉米制品等，然后用磷脂作营养肝脏的“靶向剂”，让鹅自然大量摄食，以此促进其肝脏快速生长发育。如在其中适当添加某些特殊氨基酸、酵母核酸等肝脏促长营养素，其效果更佳。　　

鹅肥肝含脂肪60％—70％左右，其中软脂酸21％—22％，亚油酸1％—2％，中链脂肪酸及16碳烯酸3％—5％，肉豆蔻酸1％，不饱和脂肪酸高达65％—68％。每100克鹅肥肝中卵磷脂含量为4．5—7克，核糖核酸9—13．5克。鹅肥肝还含丰富的维生素、多种消化酶、肝糖元、ATP、磷酸腺苷以及一系列颇有营养作用功能的物质。　　

风味更美的“蜜炙鹅肥肝”　　鹅肥肝由于需要冷藏，销售受到一定的限制。笔者建议，可以采用传统的蜜炙工艺技术，解决这一问题。蜜炙是我国中药炮制的一种方法，用于生产“蜜炙鹅肥肝”是一种创举。具体工艺是：在割取鹅肥肝工艺流程的基础上，增加灌洗工艺，即用含消毒剂的生理盐水将鹅肥肝中的残血、苦味胆汁灌洗干净，然后用配有天然香辛料的蜂蜜进行蜜炙。　　

蜜炙前应先“炼蜜”。将石菜、少许孜然以及一些可使肉类去腥、增香的天然调料，用优质白酒提取、过滤、浓缩，再按一定比例加到蜂蜜中，然后将其加热（文火），按中药炮制法进行“炼蜜”。“炼蜜”的温度控制在巴氏消毒的温度范围内，再将经过灌洗的鹅肥肝置于“炼蜜”中进行蜜炙，然后取出烘干、包装，即可获得“蜜炙鹅肥肝”产品。

Links:风力发电机，小型风力发电机，风力发电，wind generators,wind turbine,china wind turbine,bearing,
SEO friendly Web Directory ,China Manufacturer Directory,China Bussiness News

Wind turbine From Wikipedia

2008-06-17T07:48:00.000-07:00

A wind turbine is a rotating machine which enables the conversion of kinetic energy in wind into mechanical energy. If the mechanical energy is used directly by machinery, such as a pump or grinding stones, the machine is usually called a windmill. If the mechanical energy is then converted to electricity, the machine is called a wind generator, wind turbine, wind power unit (WPU) or wind energy converter (WEC).

This article discusses electric power generation machinery. Windmill discusses machines used for grain-grinding, water pumping, etc. The article on wind power describes turbine placement, economics, public concerns, and controversy. The wind energy section of that article describes the distribution of wind energy over time, and how that affects wind-turbine design. See environmental concerns with electricity generation for discussion of environmental problems with wind-energy production

Wind machines were used for grinding grain in Persia as early as 200 B.C.. This type of machine was introduced into the Roman Empire by 250 A.D. By the 14th century Dutch windmills were in use to drain areas of the Rhine River delta. In Denmark by 1900 there were about 2500 windmills for mechanical loads such as pumps and mills, producing an estimated combined peak power of about 30 MW. The first windmill for electricity production was built in Cleveland, Ohio by Charles F Brush in 1888, and in 1908 there were 72 wind-driven electric generators from 5 kW to 25 kW. The largest machines were on 24 m (79 ft) towers with four-bladed 23 m (75 ft) diameter rotors. Around the time of World War I, American windmill makers were producing 100,000 farm windmills each year, most for water-pumping.[1] By the 1930s windmills for electricity were common on farms, mostly in the United States where distribution systems had not yet been installed. In this period, high-tensile steel was cheap, and windmills were placed atop prefabricated open steel lattice towers.

A forerunner of modern horizontal-axis wind generators was in service at Yalta, USSR in 1931. This was a 100 kW generator on a 30 m (100 ft) tower, connected to the local 6.3 kV distribution system. It was reported to have an annual capacity factor of 32 per cent, not much different from current wind machines.

The very first electricity generating windmill operated in the UK was a battery charging machine installed in 1887 by James Blyth in Scotland. The first utility grid-connected wind turbine operated in the UK was built by the John Brown Company in 1954 in the Orkney Islands. It had an 18 metre diameter, three-bladed rotor and a rated output of 100 kW.

Main article: Wind turbine design

Wind Turbine Power CoefficentThe amount of power transferred to a wind turbine is directly proportional to the area swept out by the rotor, to the density of the air, and the cube of the wind speed.

Thus the usable power P potentially available in the wind is given by:

,

where P = power in watts, ¦Á = an efficiency factor determined by the design of the turbine, ¦Ñ = mass density of air in kilograms per cubic meter, r = radius of the wind turbine in meters, and v = velocity of the air in meters per second.[2]

As the wind turbine extracts energy from the air flow, the air is slowed down, which causes it to spread out. Albert Betz, a German physicist, determined in 1919 (see Betz¡¯ law) that a wind turbine can extract at most 59% of the energy that would otherwise flow through the turbine¡¯s cross section, that is ¦Á can never be higher than 0.59 in the above equation. The Betz limit applies regardless of the design of the turbine.

This equation shows the effects of the mass rate of flow of air traveling through the turbine, and the energy of each unit mass of air flow due to its velocity. As an example, on a cool 15 ¡ãC (59 ¡ãF) day at sea level, air density is 1.225 kilograms per cubic metre. An 8 m/s (28.8 km/h or 18 mi/h) breeze blowing through a 100 meter diameter rotor would move almost 77,000 kilograms of air per second through the swept area. The total power of the example breeze through a 100 meter diameter rotor would be about 2.5 megawatts. Betz¡¯ law states that no more than 1.5 megawatts could be extracted

From:http://www.wb-web.com.cn/Industrial-news/Wind_turbine_from_wiki.htm

Expendable mold casting

2008-04-08T06:05:00.000-07:00

Expendable mold casting is a generic classification that includes sand, plastic, shell, plaster, and investment (lost-wax technique) moldings. This method of mold die casting involves the use of temporary, nonreusable molds.

Waste molding of plaster
A durable plaster intermediate is often used as a stage toward the production of a bronze sculpture or as a pointing guide for the creation of a carved stone. With the completion of a plaster the work is more durable (if stored indoors) than a clay original which must be kept moist to avoid cracking die casting. With the low cost plaster at hand the expensive work of bronze casting or stone carving may be deferred until a prosperous patron is found, and as such work is considered to be a technical, rather than artistic processes it may even be deferred beyond the lifetime of the artist.

In waste molding die casting a simple and thin plaster mold, reinforced by sisal or burlap, is cast over the original clay mixture. When cured it is then removed from the damp clay, incidentally destroying the fine details in undercuts present in the clay, but which are now captured in the mold. The mold may then at any later time (but only once) be used to cast a plaster positive image, identical to the original clay. The surface of this “plaster” may be further refined and may be painted and waxed to resemble a finished bronze casting.
From:China Manufacturer

Belt pulley Parts

2008-03-25T07:20:00.000-07:00

Groundwork and Background:

In March of year 2004, Ningbo Ruyi Casting Co., Ltd. took the ownership of Fenghua Xinxin Casting Co., Ltd. and moved the whole metal melting and pouring production line to the production site of Ruyi forming an updated foundry with excellent technique and integral team.

Technique and capacity:

Ningbo Ruyi Foundry Co., Ltd. is your reliable source for Ductile iron casting, Grey iron casting .The molding process covers Resin Chemically Bonded Sand Cast, Resin Shell Cast, and Green Sand Cast.?We can also offer the advantage brought by our strategic long-term partner with diversified technique( Investment casting for steel, ,carbon steel,stainless steel, pressure die casting and gravity casting for aluminum, alloy, aluminum & zinc , as well as precision machining with general machine tool and CNC machines) so as to make customization easy to carry out . Our integral service concept brought us high praise from our customers from all over the world. Most of our products are exported to Canada, USA, and Europe Spain , Italy, Switzerland, Sweden, and so on etc. and win good reputation among our customers .

Based on the land of size 6000 square meters, the foundry's monthly iron casting output capacity is up to 350 tons, and 80% of the produced castings are sold to overseas markets.iron casting,sand casting,green sand casting,resin sand casting,Ductile Iron Casting ,Grey Iron Casting ,Investment casting ,Steel Alloy Casting ,Stainless Steel Casting ,Carbon Steel Casting ,Die casting ,Aluminum alloy Casting ,Brass Casting ,cnc machining ,Pattern Making, Automotive Parts
,Chair parts,Electric power transmission accessories,, Gear Cases Accessories,machinery parts,Marine Parts ship parts, motor parts, railway parts,,
vacuum pump parts accessories,Valve Parts Accessories,automotive parts for grey iron casting, Belt pulley Parts,Construction parts,Gearboxes casting, handwheel parts,Hydraulic parts, Locomotive accessories,Machinery parts casting,Motor parts casting,Pump parts, Sewing machine parts accessories, Ship parts Marine parts

Business scope covers:

Machinery Parts ，Automotive accessory，Valve Parts, Electric power transmission，Marine Parts ，Railway parts，Electric motor body & accessories，Gear Cases & accessories，Chair Parts，Air compressor Parts & accessories，Manhole cover parts ，Flange, Tappet parts ，Sewing machine parts & accessories，Construction Parts & accessories，Mining accessories，Gardening Parts & Accessories，Machine tools industries,Radiator parts ,cylinder head & body ,Counterweight items,Rotor housing.

Certificate and Customization:????

The foundry conforms to international standards and offers material analysis, heat treatment, non-destructive testing, proof and precision machining. With great efforts and carrying out our policy continuously which is to produce castings to meet your individual requirements, as well as monitoring each stage of production to guarantee high quality, we finally got certified by ISO9001:2000.

The foundry is located in the seaport city of Ningbo, China, it has convenient inland transportation and there are many sea-freight carriers towards different countries in the daily base. We cordially welcome customers from both domestic and overseas! Web Link Directory

Fubang Furniture

2008-03-25T07:17:00.001-07:00

Ningbo Fubang Furniture Industries Ltd is a top furniture manufacturer in China which was founded in 1952 and has made furniture for more than 50 years. Our company grows out of a traditional furniture-make factory named Ningbo First Wood Furniture Factory which was renamed to Ningbo Fubang Furniture Industries Ltd in 2002.

Our company was located in Dagang Industry City, Ningbo Economic & Technical Development Zone, close to a famous seaport-Beilun port. Our company location takes advantage of weather and terrain, so to speak. The company has two subsidiary factories of total RMB 4.5 hundred million investments. The total area of factory is 170,000 square meters. The annual sales are RMB 5 hundred million. Our company is the largest furniture manufacturer and exporter in Zhejiang Province in present with advanced world level wood machinery and furniture production line which were imported from Germany, Italy, Japan and other countries.Our main Customers include U.S Top 10 furniture companies which are Thomasville, Stanley, Ashley, Lexington, Bassett, Dimplex and etc.Bedroom Furniture,Dining room Furniture,Living room Furniture,Home Office Furniture,Youth Furniture ,Bedroom Furniture ,Night stand ,Door Chest ,,Dresser ,Armoire ,Dining Table ,Arm Chair ,Side Chair ,China Curio ,Sideboard ,End Table ,Cocktail Table ,Sofa Table ,Console ,Entertainment Center ,Computer Workstation ,Double Pedestal Desk,Writing Desk,Bookcase,File Cabinet,Desk Chair,Computer Desk,Entertainment center,Kitchen furniture,furniture

Ningbo Fubang Furniture Industries Ltd was not only have the advanced machinery, but also have an experienced professional manufacturing team. Our main products are American fine furniture with excellent quality, beautiful carving and unique craftwork which was exported to Europe and American market.

Our company regard “develop country, establish beautiful home” as own responsibilities, take innovation as a main principle and set globalization fulfillment as a strategic objective since the very day of its founding. It is continuing to develop and improve core competitiveness with stress on producing high quality furniture and creating famous brand in order to become a much stronger and influential furniture manufacturer in domestic and overseas market.Web Link Directory, SEO Friendly Web Directory,China Manufacturer,China Manufacturer Directory

Radiator towel warmer

2008-03-25T07:15:00.000-07:00

Ningbo Suofei Electrical Appliance Co., Ltd. is a professional radiator company. Our company owns more than 300 employees, more than 20 intermediate and senior technical and management personnel, 5 standard workshops, more than 300 units (sets) of various modern production equipments from die-casting to lacquering, domestic advanced automatic plastic-spraying production lines, at the same time, it is equipped with imported advanced testing instruments such as spectrum analyzer, as well as professional laboratories such as testing laboratory, physical & chemical laboratory, metrology laboratory and paint laboratory etc,.

Our company is based on the fundamental as “High start point, high standard, high quality”, market-oriented, striving for consumers satisfaction, and mainly produce die cast aluminum radiator, electric oil radiator and towel warmer. Especially the new developed advanced high-pressure cast aluminium radiator are already exported to more than ten countries and regions in Europe and North America owing to its features, such as high safety and reliability, high heat efficiency, good thermal performance, being energy-saving, environment-friendly and light, long service life and so on, and won highly favorable praises from all customers.

Aluminum radiator,radiator,aluminium radiator,Towel warmer,Electric radiator,Steel aluminum compound radiator ,Radiator,Aluminum radiator,Aluminium radiator,Die casting aluminum radiator,Die cast aluminum radiator,Die-cast aluminum radiaotr.Towel warmer,Bathroom radiator
,Towel radiator
,Towel heater
,Bathroom heater
,Radiator towel warmer
,Heated towel warmer
,Electric towel warmer ,,Electric radiator,Electric heater ,Oil radiator,Oil heater ,Oil filled radiator,Oil filled radiator heater,Oil filled heater,Oil filled electric heater,Electric oil radiator,Electric oil heater

Our company always pursues to the tenet as “Quality First, Reputation First, Service First”, takes users’ requirements as our tasks, continuously introduces foreign advanced technologies and equipments, enlarges producing capacity, actively exploits international markets, to make itself become a first-class high-standard, high-level and competent radiator manufacturer in the world.

We sincerely welcome people from all over the world and look forward to establish business relations between us.

旅游租车需要的手续？

2008-03-08T20:13:00.000-08:00

一、租车手续

承租方应出具能够证明承租方及经办人身份的有效证件并配合出租方对承租方身份的确认。

1、单位租车：

（1）、提供真实的联系方式，如名称、电话、地址、联系人等。

（2）、单位营业执照副本、法人代码证书原件，法人委托书或单位介绍信。

（3）、非法人单位需提供上级单位开具的租车介绍信，负责人身份证。

（4）、经办人身份证。

（5）、驾驶员的身份证、驾驶证。

2、个人租车：

（1）、承租方身份证、及全家人户口簿。户口簿交出租方保存，租赁合同中止时退还。

（2）、租赁车使用人身份证、驾驶证。

（3）、承租方现居住地址和联系电话。

（4）、承租方应提供第三者作为担保人并带身份证。

二、签定合同

1、承租方须与出租方签订租车合同。

2、单位租车需在合同上加盖公章。

3、个人租车应有担保人在合同上签字担保。

三、租金、保证金：

1、承租方签订合同后交纳当期租金并按合同规定及时交纳租金。

2、承租方签订合同后交纳保证金。保证金用于支付承租方因违反合同条款而支付的费用，合同中止时扣除实际金额后退还承租方。保证金不能抵作租金。

四、保险：

1、承租方租车前须了解所租车辆具有的保险险种。

五、承租方的权利：

1、应对所租车辆进行认真检查，确认车辆技术状况良好，并核对规定证件后办理车辆交接手续。对车辆技术状况不满意有权提出换车要求。

2、承租方对租赁经营者收费不出具发票、多收费和服务态度恶劣等经营行为有权向公司及有关部门投诉，非人为原因造成的车辆损坏，可享受免费的救援服务。

3、承租方有权在费用自理的前提下，要求增设其他车辆险种。

六、承租方的义务：

1、承租方须自觉遵守合同中规定的各项条款，承租方车辆应交与合同中规定的驾驶员使用。

2、驾驶员使用车辆时，应严格执行操作规程，合理驾驶、爱护车辆，发现车辆状态异常，立即通知公司并协助公司处理。

3、驾驶员必须遵守交通管理条例，发生违章行为主动到交管部门接受处罚。

4、承租方车辆发生交通事故，应向交管部门报案并及时通知租赁公司，于24小时内向公司提供必要的事故书面报案材料并协助租赁公司办理索赔手续。

5、承租方担负承租期间的车辆安全保管责任，承租车辆发生交通事故、车辆被盗等情况，承租方须按合同支付部分费用。

6、承租方租赁没有营运手续的车辆，可拒付租赁费用，并可向管理部门举报。

转载自：汽车租赁.合肥汽车租赁,合肥市汽车租赁公司，合肥汽车租赁公司，合肥租车，合肥婚庆租车，合肥商务车租赁，婚庆租车，商务车租赁，汽车租赁,合肥汽车租赁,合肥市汽车租赁公司，合肥汽车租赁公司，合肥租车，合肥婚庆租车，合肥商务车租赁，婚庆租车，商务车租赁，汽车租赁

List of Airsoft Manufacturers

2008-03-08T20:09:00.000-08:00

There is a great divide between airsoft companies. The majority of quality manufacturers can be found on the internet, but have little or no street presence, except at specialty shops. However, small street airsoft stores can be found in many areas. Airsoft guns are also prevalent at swap meets, which usually carry Chinese-made non-branded airsoft guns. It is important to note that while the factories listed below china manufacture the guns, consumers will have very little success in regards to support after the sale if they purchase items in a factory box. In the United States, Companies like Crosman, Cybergun, Daisy, and Palco Sports are considered manufacturers even though the product is actually made at one of the many factories listed below. Like most companies that have products made abroad, the actual factory is relevant only for their reputation of quality, china manufacturer direcotry while the "china manufacturer" is considered by the consumer to be the company that brings the product to market. For example: Nike has most of it's products made outside of the USA, yet they do not own the factories. These factory names are irrelevant to the consumer. In the same case, Airsoft companies like the aforementioned pay the factories to produce products for them to their specifications. Because Airsoft was introduced as an import product first, the factories themselves gained reputations for quality. The advent of 'rebranding' in most cases allows the consumer a resource for service after the sale.

租赁汽车时如何选择合适的车型

2008-02-21T08:13:00.000-08:00

1、汽车越重越费油

从节油观点来看，汽车自重与油耗成正比关系，即重量越大的汽车越耗油，使用经济性相对较差。小型车自重每增加40公斤要多耗燃油1%。但自重大的汽车具备急转弯和急刹车状况下稳定性较好的优点，不易发生“发飘”的现象。

2、不同驱动方式的利弊

根据动力传动方式，汽车可分为“四轮驱动”，“发动机前置、后桥驱动”，“发动机前置、前桥驱动”，“发动机后置、后桥驱动”四种: 　四轮驱动方式主要用在一些越野车上，优点使前后轮都有驱动力，牵引力大，通过性强，附着力大，稳定性好，车身和传动系统的钢板比轿车厚、安全系数高，适于越野。但缺点是重量大，节油性差。发动机前置、后桥驱动方式主要用在一些中、高级轿车上,优点是前后桥承载的负荷基本一样，动力性强，牵引力大，在爬坡、泥泞道路和颠簸路上行驶时，动力性、防后轮侧滑和稳定性明显优越于“前置前驱动”的汽车。但其缺点是传动轴退至后桥，导致地板凸起，几个总成分开布置，占据空间较大，很难使汽车小型化。发动机前置、前桥驱动方式主要用在中小型汽车上,优点是省了传动轴，地板平坦，传动系紧凑，重量减轻，地板降低，重心下降。但其缺点是上坡时重量向后移，前桥负荷减轻，不能产生足够的牵引力，在较滑的路面上因前桥重量不够而产生不了足够的牵引力；下坡时前桥负荷过重，特别是在下坡刹车时前桥负荷会进一步加重。这种车型不宜在上下坡较多的山区使用。发动机后置、后桥驱动方式主要用在微型车上，优点是省了传动轴，附着力大，牵引力也大，轴距较小，地板下没有排气管，发动机废气、噪音不会污染车厢内。但其缺点是后桥负荷大，转弯易侧滑，操纵系统太长，结构复杂，冷却系统复杂，行李箱太小。

3、自动档汽车省事不省钱

自动档（又称自动变速）装备有自动控制装置，行车中可根据车速自动调整档位，无需人工操作，省去了许多换档及踏踩离合的工作。其不足之处在于价格昂贵、维修费用很高，而且使用起来比手动档车费油，因为自动变速器的动力传递是通过液压来完成的，在工作中会造成动力损失。尤其是低速行驶或堵车中走走停停时，更会增大油耗。

4、选用装配子午线轮胎的汽车

装有子午线轮胎的汽车与装有斜交轮胎的汽车相比，耐磨性可以提高50%～100%，滚动阻力降低20%～30%，而且可以节油6%～8%。

5、选用铝台金轮圈的汽车

目前铝合金轮圈的价格仍是钢制轮圈的2～3倍左右，但其使用的效益也远高于钢轮：

（1）质量轻，省油；

（2）散热性能好，增加轮胎寿命；

（3）真圆度高，可以提高车轮运动精度，适合高速行驶；

（4）弹性好，提高车辆行驶中的平顺性，更易于吸收运动中的振动和噪音；

（5）可100%回收，属环保产品。

合肥梦园汽车租赁公司提供合肥汽车租赁服务,合肥租车,合肥婚庆租车,合肥商务车租赁，以别克林肯、奥迪A6、别克君威，奥德赛车为主.根据客户不同需求提供合肥汽车租赁服务,也为各大企业单位、社会团体提供公务用车、会务用车、代客接机、婚礼配车及旅游包车长期或短期的租赁业务

Delphi to build new half-shaft plant

2008-02-05T06:53:00.000-08:00

Struggling US auto parts maker Delphi Corp, whose non-core businesses have become merger targets for some Chinese firms, said it will build a new half-shaft plant in China with a local partner.
Delphi will control a 60 per cent stake in the US$40 million factory in Wuhu, East China's Anhui Province, it said in a statement. Lingyun Industrial Group, from Hebei Province, will hold the remaining 40 per cent.

The plant, the second half-shaft partnership between Delphi and Lingyun, will begin full operation in 2008, doubling the half-shaft production capacity of the US group's steering unit in China, Delphi said.

Delphi, which provides more than 40 kinds of auto parts in China, now has 11 manufacturing sites in the world's second-biggest vehicle market. The firm, which also has a technical centre in Shanghai, has invested more than US$500 million in China.

A former subsidiary of US carmaker General Motors, Delphi announced earlier this year that it aimed to sell or close non-core product lines by the end of next year to slash costs. These product lines could include brake and chassis systems, steering and wheel bearings, door modules and latches, and cockpits and instrument panels.

A slew of Chinese companies, such as the nation's top diesel engine maker Weichai Power Co and biggest auto parts producer Wanxiang Group, recently said they intend to buy some Delphi assets in the United States.

However, none of them have revealed what kind of Delphi assets they are interested in.

Jay Jiang, deputy general-manager of Delphi China Holding Co, yesterday declined to provide any details of talks between Delphi and these Chinese firms, saying: "Lots of companies in other parts of the world, such as India, are also interested."

NH Ball Bearings' Astro Division recognized by Northrop Grumman

2008-01-27T19:52:00.001-08:00

igus* Inc., the industry-leading developer of plastics cable carriers, bearings and continuous-flex cables, now offers improved integral fiber rod assemblies inside its multi-axis Triflex* R robot cable carriers.

After many series of tests, igus has implemented an iglide* bearing on the moving tips of its fiber rods to increase the torsional strength. These modified fiber rod heads can better cope with the extreme, twisting movements often demanded in robotic applications at the touch of a button. The new tips are now used in all Triflex R fiber rod assemblies.

The interior support fiber rods are designed to mount a designated section of Triflex R Energy Chain* in a fixed position. This reduces torsion and creates pre-tension through this part of the plastics cable carrier, preventing it from interfering with certain work areas around a robot.

Triflex R was developed to protect moving cables and hoses on 6-axis robots used in demanding industrial environments, such as in automotive production plants or welding applications. The cable management system is able to move multi-dimensionally in all axes and can twist up to 380 degrees per yard, enabling easy movement through complex configurations. The smooth, tubular design also permits the cable carrier to glide around the exterior of the robot without catching.

Triflex R is available in enclosed and light versions. The enclosed version fully protects cables and comes with an ¡®E-Z¡¯ option, which allows cables and hoses to be pressed through an opening along the length of the chain. The light design¡ªfor less demanding applications¡ªcomes in the E-Z style and is lower cost than the enclosed, or enclosed E-Z versions.

The improved fiber rod assemblies are the latest update to the Triflex R product family, which consists of nearly 100 components to cover every scenario: from big welding robots to small palletizing robots. Various sizes and accessories are available, as well as torsion-resistant plastics robot cables from the igus Chainflex* product range, which now includes 800 cables specifically designed for moving applications.

Igus develops and manufactures industry-leading plasticscable carriers, continuous-flex cables, plastics bearings and linear guide systems.

With many years' export experience, advance bearing manufacturing equipments and diverse testing device, we can meet customers' all requirement for assured quality and timely delivery.

Our Company is striving to be ever more creative,more cooperative,and provide even higher-quality and competitive products.Company management firmly believe the enterprise will emerge as one of the strongest bearing manufacturers in the world near the future.

We at HIANA BEARINGS are at specialized makers of high-quality bearings,includingWheel Bearings ,Bearing Kit ,King pin kit ,Hub Units ,Water Pump Bearings ,Clutch Release Bearings ,Tensioner Bearings ,Air Conditioner Bearings ,Steering wheel bearings ,Universal Joint Kit ,Taper Roller Bearings ,Cylindrical Roller Bearings ,Miniature Bearings ,Angular Contact Bearings ,Ball Bearings ,Needle Bearings ,Insert Bearings ,Agriculture Bearings ,Pillow Blocks ,Plain Bearings ,Self-Lubrication Bearings ,Self-aligning ball bearings ,Linear Motion Bearings ,Thrust Bearings and so on

With the objective of making its buyers more competitive both in terms of finished-product price and quality,HIANA continuously diversifies the applications of is automotive bearings,improves product quality,develops new bearings models,enhances customer service,and increases production capacity.The result is a solid reputation in markers around the world.

In term or applications,HIANA’s products are used in almost all European,Asian(Japanese & South Korean),Amercian,and Russian car models.With such comprehensiveness,HIANA’s produts are widely welcome for after marker use in Russia,Brazil,Argentina,Chile,South Korea,North America,Europe,and the Middle east,Numerous HIANA models are supplied on an original

TBC is famous at Automotive Bearing including clutch release bearing and tensioner pulley in China

.At present,we develop more than 280kinds of release bearings for automotive bearing ,Tensioner Bearings there are various of shape and constructions,such as self-aligning bearing,plain bearing,clutch release bearings,thrust bearing,roller or ball bearings,the bearing with plastic housing,the bearing with cast-steel housing, the bearing with forge-steel housing,the bearing with powdermetallurgy housing,the bearing with pressed inner ring and outer ring. 100% products is for export the wordwide market,above 50% is supplying OEM &OES.

TBC possess the advanced clutch-bearing life testing machine,specialize in testing clutch release bearings for OEM &OES order requestion.in addtion,we have a complete set of advanced bearing testing and inspection equiments,includs the tester for bearing duration,bearing vibration,bearing roundness,bearing length,bearing shapes,bearing roughness. we realize our TBC quality target on basis of advanced bearing progress machine and testing instruments,and the strictly technical quality management terms.

We win our customers rely on the HIGH QUALITY.